NIS2 France: are manufacturers and producers in scope?
Two answers, and neither is yes. The French law does not exist yet, and manufacturing as a whole is not a NIS2 sector. What actually binds you sits elsewhere: the supply chain, customer questionnaires and the Cyber Resilience Act.
The short answer
Two answers, and neither is yes. As of 9 November 2026, no NIS2 obligation is enforceable in France: the transposition law has still not been enacted[1]. And when it is, manufacturing as a whole will still not be a NIS2 sector: Annex II of the directive lists only six manufacturing categories[4]. A machining workshop, a sheet-metal shop, a plastics processor, a packaging or furniture maker is not among them.
What catches a French manufacturer today is therefore not the law but three side doors: your status as a supplier to an in-scope entity, your customers' security questionnaires, and the Cyber Resilience Act if you sell products that communicate — its reporting obligation has applied since 11 September 2026[5].
One figure measures the gap between law and risk: of the 1,366 incidents reported to ANSSI in 2025, four sectors account for 76 % — education and research (34 %), ministries and local authorities (24 %), healthcare (10 %) and telecommunications (9 %). Manufacturing is not among them[3]. The agency itself notes that these figures reflect reports from its own beneficiaries and are not necessarily representative of all security events in France[3]. Low visibility is not immunity.
Are you in scope? The tests, in order
Run them in this order. Once a test fails, the later ones change nothing.
- Does your actual activity fall into one of the six Annex II manufacturing categories? Not your registered activity code: what you actually make. The table below lists them.
- Do you reach the size threshold? NIS2 does not reach below medium-sized: at least 50 staff, or annual turnover and balance sheet total both above 10 million euros[7]. Below that you are out of scope, unless the State designates you individually.
- Do you manufacture medical devices? This is the trap in the list: the category is read through the MDR and IVDR regulations, not through an activity nomenclature. A subcontractor machining a part for a device maker is not itself a device manufacturer.
- Are you chemicals or food? Those two sectors have their own Annex II entries, separate from manufacturing: the analysis then runs on those entries, not this one.
- Are you a supplier to an in-scope operator? You are then not a NIS2 entity, but your customer must secure its supply chain and will pass its requirements to you by contract. In practice, this is how almost every French industrial SME will meet NIS2.
To settle it in a few minutes, our free NIS2 check follows exactly this sequence.
NIS2 in France: where the law stands on 9 November 2026
The vehicle is the bill on the resilience of critical infrastructure and the strengthening of cybersecurity. Its track record, as published in the Senate's legislative file[1]:
- Text no. 78 (2024-2025) adopted by the Senate at first reading on 12 March 2025.
- Transmitted to the National Assembly on 13 March 2025, as text no. 1112.
- Special committee report no. 1779, tabled on 10 September 2025.
- Then nothing: first reading in the National Assembly is not complete.
Three practical consequences, not to be confused with each other. There is no French registration deadline, because there is no text to set one; ANSSI's MonEspaceNIS2 platform exists to help entities prepare, it is not a legal registration[6]. The penalty figures quoted everywhere — 10 million euros or 2 % of worldwide turnover for an essential entity, 7 million euros or 1.4 % for an important entity — come from Article 34 of the directive[4], not from a French law; a manufacturing entity would fall in the second category. And no authority can sanction you under NIS2 in France today.
The delay does carry a price, but the State pays it, not you. The transposition deadline was 17 October 2024[2]. The European Commission sent a letter of formal notice on 28 November 2024, a reasoned opinion on 7 May 2025, then decided on 8 July 2026 to refer France to the Court of Justice of the European Union, alongside Ireland, Spain and the Netherlands, asking the Court to impose a lump sum and daily penalties until complete transposition is notified[2]. Read that as a calendar: the law will come, and it will land abruptly rather than gradually.
What Annex II actually covers in manufacturing
| Annex II category | What it covers | What it does not cover |
|---|---|---|
| Medical devices and in vitro diagnostic medical devices | The manufacturer under MDR and IVDR, the one placing the device on the market under its own name | The subcontractor machining, sterilising or packaging for it |
| Computer, electronic and optical products | Boards, sensors, measuring instruments, industrial optics | The assembler of finished bought-in products, with no design |
| Electrical equipment | Motors, transformers, switchgear, manufactured panels | The electrical contractor who installs without manufacturing |
| Machinery and equipment not elsewhere classified | Production machines, lines, industrial equipment | Maintenance and retrofit of existing machines |
| Motor vehicles, trailers and semi-trailers | Vehicle builders and body builders | The garage, the repairer, the parts trade |
| Other transport equipment | Rail, aerospace, marine, two-wheelers | Aerospace or rail maintenance on its own |
The right-hand column is a reading of the annex[4] and of the manufacturer definition in MDR and IVDR, not published guidance: borderline cases will only be settled by the French law and its implementing texts. If you are one, document your reasoning now — that is what you will be asked for, not an answer.
What already binds you, without waiting for the law
Two documented French scenarios that did not wait for transposition
The defence supply chain. Between January and June 2025, ANSSI observed ransomware compromises of several industrial entities involved in the supply chain of the French defence industrial and technological base — firms that design and manufacture systems, parts and software[3]. None was a target in its own right: they were the way in.
Exposed controllers. Since 2024 the agency has handled reports of industrial installations targeted by hacktivist groups: programmable controllers whose management interface is exposed on the internet without authentication, or with a default password. Access to that interface can allow an attacker to act on the valves and turbines of the installation[3]. The attacker's cost of entry is zero.
The rest of the 2025 panorama sets the scale: 3,586 security events handled over the year, down 18 % year on year, and 128 ransomware compromises, with SMEs, micro-firms and mid-caps remaining the most affected category[3]. So your sector barely appears in the statistics of a regulator that has no grip on you yet, while your size bracket is the one most hit by the threat that stops a production line.
The first five actions
- Write your scope on one page, and date it. Activity actually carried out, the Annex II category claimed or ruled out with the reason, headcount and the two size figures from the closed financial year, list of known in-scope customers. This is the document you will produce for every questionnaire.
- Get your controllers off the internet. Inventory of management interfaces reachable from outside, removal of default passwords, access via private network or administration gateway. This is precisely the gap the 2025 panorama describes[3], and the cheapest item on this list.
- Treat the Cyber Resilience Act as a product deadline, not an IT topic. If you sell a machine, a sensor or a piece of equipment that communicates, the reporting obligation in Article 14 of Regulation (EU) 2024/2847 has applied since 11 September 2026, and the rest of the regulation applies from 11 December 2027[5]. Regulation (EU) 2023/1230 on machinery, which replaces Directive 2006/42/EC from January 2027, adds requirements covering corruption and reliability of control systems[8]. Both texts are directly applicable: they wait for no French law.
- Prepare the supplier answer before you are asked for it. Your in-scope customers — in Belgium, the Netherlands or Luxembourg, where the national laws are already in force — will send their requirements by contract. Our file on supplier security questionnaires sets out the answer pack to build once.
- Have management approve the measures in writing. The directive places the approval duty on the management body[4]. In the transpositions already voted around France, this is the point that unlocks a budget without going through the IT department. A one-page board minute is enough, and it will count as evidence the day the French law applies.
At CyberNovaLabs.io
CyberNovaLabs.io does not sell NIS2 compliance to a French manufacturer that is out of scope: that would mean invoicing you for a law that does not exist yet. Two things are useful now. The scope note described in point 1, delivered as one page you can hand to a customer. And, when your problem is commercial rather than regulatory, B2B appointment setting with industrial buyers, with qualification criteria written before launch, no minimum term, priced per appointment or as a package, on quotation.
Read next: NIS2 and manufacturing in the Netherlands, where the law is in force and the supervisors are already named, and NIS2 France for software vendors and IT providers if part of your value is software. For cross-border industrial accounts, see our Brussels appointment setting page.
Discuss your scope and your industrial appointments
Sources
- Senat - dossier legislatif du projet de loi relatif a la resilience des infrastructures critiques et au renforcement de la cybersecurite (texte n° 78 adopte le 12 mars 2025, transmission a l'Assemblee nationale, rapport n° 1779)
- Commission europeenne - Commission refers Ireland, Spain, France and the Netherlands to the Court of Justice for failing to transpose the rules on cybersecurity, communique du 8 juillet 2026
- ANSSI / CERT-FR - Panorama de la cybermenace 2025, CERTFR-2026-CTI-002
- Directive (UE) 2022/2555 (NIS 2) - annexe II, point fabrication, et article 34 sur les sanctions
- Reglement (UE) 2024/2847 (Cyber Resilience Act) - article 14 applicable au 11 septembre 2026, application generale au 11 decembre 2027
- ANSSI - MonEspaceNIS2, aide en ligne sur le perimetre et la preparation des entites
- Recommandation 2003/361/CE de la Commission - definition des micro, petites et moyennes entreprises
- Reglement (UE) 2023/1230 relatif aux machines - remplacement de la directive 2006/42/CE et exigences visant la corruption des systemes de commande
Qualified meetings, no lock-in.
Criteria in writing before launch, pay per meeting or monthly, stop with a simple email.
Read next
NGINX: five critical flaws patched urgently (18/11/2026)
Five critical flaws in NGINX, the software receiving traffic for more than 225 million websites, were fixed on 18 November 2026. Four authorities warned the same day. Your site can be exposed without having a single defect of its own.
Read the article →November 20, 2026 · 8 min readNIS2 Luxembourg: are estate agencies and syndics in scope?
Real estate appears in neither Annex I nor Annex II of the Luxembourg Act of 5 May 2026. But your supervisory authority already exists: the AED, on money laundering. Position as of 20 November 2026.
Read the article →November 10, 2026 · 9 min readNIS2 Netherlands: are accounting firms and fiduciaries in scope?
The Dutch law implementing NIS2 took effect on 15 August 2026. It does not name accountancy. Even so, a Dutch accounting firm or fiduciary inherits duties through three doors: the GDPR, the Wwft, and the contracts of clients who are themselves in scope. Here is what applies, and what does not.
Read the article →November 9, 2026 · 7 min readCSBN 2026: AI speeds up the cyber threat on SMEs (06/11/2026)
On 6 November 2026 the Dutch NCSC and the NCTV published their annual cyber threat assessment. Two findings matter directly to an SME: AI is already used in every phase of an attack, and the gap between a flaw being published and being exploited is now measured in hours. Here is what changes for you, country by country.
Read the article →November 8, 2026 · 8 min readB2B appointment setting for hotels and tourism
Three in four French hotels are independents: your contact decides alone, but not in July. A practical guide to the calendar, the decision-makers and the qualification grid for B2B appointment setting in hospitality and tourism.
Read the article →November 7, 2026 · 8 min readNIS2 Luxembourg: are clinics and laboratories in scope?
Health sits at point 5 of Annex I to the Luxembourg Act of 5 May 2026. But the entry gate is not the European directive: it is the 2014 patients' rights Act, and the size test is measured on the group.
Read the article →